HEC Mole - Air driven boiler tube cleaning device, manufactured by Myriad.
HEC Mole. Air driven boiler tube cleaning device suitable for cleaning the surfaces of all heat exchanger tubes within a biomass boiler with minimum operator effort. The device only requires 45cm clearance in front of the boiler and is able to clean 13 metres per minute, and up to 60 tubes per hour, without spinning and without flexible shafts or rotating rods. The device's vibratory action enables it to travel along the tube without the need of a long extension rod, or any manual pushing or pulling, and it is all controlled with a foot valve. Once the device reaches the end of the tube it automatically reverses the action and returns to the operator.
Requirements:
- Compressed air pressure:
- Minimum: 4.2 kg/cm² (60 lbs,psi)
- Maximum: 10.5kg/cm² (150 lbs,psi)
- Volume required: 7m³
Kit consists of:
- Tube cleaning device (Mole)
- Y-piece
- Hose Assembly (10mm-3/8") 2WB/10m[Ferret to F/V]
- Foot Valve (Switch) (QR couplings)
- Hose Assembly (10mm-3/8") OR/5m [F/V or F/L to A/S]
- Free Standing Lge Filter, Regulator & Lubricator (QR)
- Hose Assembly (10mm-3/8") OR/10m [F/V or F/L to A/S]
- Air tool oil (1ltr)
- Complimentary Storage Container
- 2x 50mm brush heads
Excludes:-
Compressor (air hose from compressor to air filter)
Vacuum hose
|
|
. Please contact us if you have any questions about this product (manufacturers part no. PR.00.00725), on
info@biomasssparesonline.co.uk. When speaking with one of our heat and power product advisors, please mention the following internal part code: PR.00.00725
HEC Mole - Air driven boiler tube cleaning device - Myriad is a universal part and is compatible with most boiler makes and across many types of heating systems.